Configurator MannTek Products

Home
DE | EN
Select: Nominal Diameter
DN 25 (1")

DN 25 (1")

For industrial process plant, road and rail tankers, IBC containers, Pharmaceutical and Petrochemical industries etc.

Additional Info
DN 50 (2")

DN 50 (2")

For industrial process plant, road and rail tankers, ISO containers, IBC containers, Pharmaceutical, Aviation fuel bunkering and Petrochemical industries.

Additional Info
DN 65 (2½")

DN 65 (2½")

Recommended for road tanker bottom loading for a varity of fluids, ISO containers, Aviation fuel bunkering or on any application where product contamination needs to be minimized.

Additional Info
DN 80 (3")

DN 80 (3")

Similar to 2½", but where higher loading rates are required. Especially on rail tankers, marine tankers, ISO containers, Aviation fuel bunkering and related activities.

Additional Info
DN 100 (4")

DN 100 (4")

Recommended for loading/unloading of Road and Rail tanker, aviation refueller, ISO containers etc. Also for Offshore Supply Vessels, ship to shore transfer, ship to ship transfer and ship to rig transfer.

Additional Info

Part Number

D

Product GroupSwivel Joints
Swivel Joints
Example Pictures:
Short DescriptionSJ
Hose Swivels
One of the main causes of failure in fluid transfer systems is torque stress (torsion) between two equipment parts. The compact MannTek Swivel Joints help to avoid this.
Their use will extend hose life and avoid premature failure of the hose assembly.
Suitable for a wide range of liquid and gaseous media including petroleum based products, chemicals and foodstuffs.
DescriptionStandard type with single ball race
allows free rotation between hose assembly and attached handling equipment such as filling nozzles.
Standard duty Swivel Joints are used e.g. in filling plants to avoid torsion of hose assemblies and improve the handling and coupling of nozzles if no integrated swivel is attached.
One capsulated ball bearing and PTFE bearing. Electrically conductive.
Designed to allow smooth rotation (slow rotary movement) of operating devices such as filling nozzles.
Not certified to bear side loads or high bending moments; for high bending movements, please use 'heavy duty' Swivel Joints.

Available sizes ¾" (DN 19) up to 4" (DN 100). Special type 'Heavy Duty' with double ball race
allows free rotation between hose assembly and the fixed point of a plant / pipe system, e.g. tank truck or rail tanker connection.
Heavy duty Swivel Joints are designed especially for hose reels to load and unload products where high bending forces can occur - e.g. offshore hose reels ship-to-shore, oil platform loading rigs, hoses for road and rail tankers.
Two capsulated ball bearings. Electrically conductive.
Designed to allow smooth rotation (slow rotary movement) of hose assemblies which are attached to a fixed point of the pipework, e.g. rail tanker or tank truck connection.
Suitable to bear high bending moments. Do not use for strong side loads directly on the swivel.

Available sizes 2" (DN 50) up to 10" (DN 250).
ConnectionsBSP/NPT thread, DIN/ANSI/TW/TTMA flange – others on request.
Any combination for both sides possible.
PressureWorking pressure:
Aluminium = PN 16,
Brass = PN 16,
Stainless steel, Hastelloy, Titanium = PN 25.
Temperature-20° C up to +80° C;
fulfillment of larger temperature range -50° C up to +200° C is possible - depending on medium, coupling and seal material.
MaterialBody: choice of stainless steel (1.4401 (AISI 316), 1.4404 (AISI 316L)), aluminium or brass – others on request.
Balls: stainless steel.
O-Rings: Viton® (FPM/FKM) – others on request.
Flat seal (for female parallel thread connections): PTFE (stainless steel couplings), polyurethane (aluminium / brass couplings) – others on request.
Product Sheet / Links
Brochure Swivel Joints
Homepage Swivel Joints
Application Photos SJ
Animation Swivel Joint (SJ), Standard Version:
Animation Swivel Joint (SJ), Heavy Duty Version:
Type of CouplingStandard Duty
Product NameHose Swivels - single ball bearing
Short DescriptionStandard Duty
DescriptionStandard type with single ball race
allows free rotation between hose assembly and attached handling equipment such as filling nozzles.
Standard duty Swivel Joints are used e.g. in filling plants to avoid torsion of hose assemblies and improve the handling and coupling of nozzles if no integrated swivel is attached.
One capsulated ball bearing and PTFE bearing. Electrically conductive.
Designed to allow smooth rotation (slow rotary movement) of operating devices such as filling nozzles.
Not certified to bear side loads or high bending moments; for high bending movements, please use 'heavy duty' Swivel Joints.
Sizes¾" (DN 19) up to 4" (DN 100).
ConnectionsBSP/NPT thread, DIN/ANSI/TW/TTMA flange – others on request.
Any combination for both sides possible.
PressureWorking pressure:
Aluminium = PN 16,
Brass = PN 16,
Stainless steel, Hastelloy, Titanium = PN 25.
Temperature-20° C up to +80° C;
fulfillment of larger temperature range -50° C up to +200° C is possible - depending on medium, coupling and seal material.
MaterialBody: choice of stainless steel (1.4401 (AISI 316), 1.4404 (AISI 316L)), aluminium or brass – others on request.
Balls: stainless steel.
O-Rings: Viton® (FPM/FKM) – others on request.
Flat seal (for female parallel thread connections): PTFE (stainless steel couplings), polyurethane (aluminium / brass couplings) – others on request.
Product Sheet / Links
Brochure Swivel Joints
Homepage Swivel Joints
Animation Swivel Joint (SJ), Standard Version:
C O M P A R E
Your choice:
Choose additional options
or click here to go on.